Reguflow is a perforated layflat irrigation hose that is both simple and lightweight. The hose works under a low operating pressure from a water main or low pressure pumped system.
Available as a 30 metre pack or 100 metre pack.
Reguflow Irrigation Hose
Reguflow removes the need for complicated and expensive irrigation systems, yet provides a fine, uniform irrigation pattern. Laser technology is utilised to produce very small and accurately sized perforations that are evenly spaced along the length of the hose.
When water is turned on, the hose slowly inflates and an even water pressure will exist throughout the entire length being used. These jets of water have the same velocity at any part of the hose, allowing for uniform watering throughout.
Reguflow in action
- Easy to use
- Cost effective irrigation system
- Works under low water pressure
- Minimises run off
- Very little maintenance required
- Uniform irrigation
- Fittings included
|Step 1: Attach hose with geka connections and jubilee clips|
|Step 2: Blank off one end|
|Step 3: Lay out hose and begin irrigation|
Note: It is important to turn the water supply on slowly so as not to produce a 'surge pressure' as the hose inflates. Use the supply tap to restrict the volume of water delivered to the perforated hose.
|Fittings Pack Contents|
|1" Brass Hose Tail||2||Each end of the Reguflow|
|1" Jubilee Clip||2||To fix the above brass hose tails|
|Geka Blanking Cap||1||End of the Reguflow|
|½" Brass Hose Tail||1||End of the hose|
|½" Jubilee Clip||1||To fix the above brass hose tail|
|*If your hose is bigger than ½" you will require a brass hose tail to suit. Please see our range of Brass Hose Tails|
|Hose||Can be cut to fit requirements|
|Coverage||Up to 500 m²|
|Water App Rate||Equivalent to 4 mm of rain per hour|
For further information on the Reguflow with Fittings, please contact a member of our technical sales team on 01952 897917.