|Product Type||Biocide/Surface Cleaner|
|Active Substance||500 g/l nonanoic acid|
|Formulation Type||Emulsifiable concentrate|
|Areas of Use||Outdoor buildings & building materials, porous & non-porous hard surfaces in green spaces and all roof types (except thatched)|
Active Ingredients: 500 g/l nonanoic acid
Enclean is a plant origin-based biocide or hard surface cleaner which is an ideal solution to remove algae and other green deposits from pavements, greenhouse exteriors, buildings, patios, walls, roofs, paths, synthetic tennis courts, 3G and 4G sports pitches, tarmac, block paving, concrete, or wood, as well as street furniture, cemeteries, roofs, wooden decking, fence panels and playing surfaces.
Enclean contains 500 g/l nonanoic acid. This active substance works by destroying cell membranes, preventing photosynthesis and other physiological processes. Enclean delivers fast and long-lasting results which are visible within just a few hours.
Unlike other de-greening chemicals which require large volumes of product and water, Enclean can be applied at low water volumes. In fact, just one litre of Enclean mixed with water will treat well over 500 m2 in just one 15 litre knapsack.
Because Enclean is plant derived, it is safe to use, and it has no environmental hazard classification.
Enclean can be used twice per year at a rate of 1.8 ml/m2 or 18 l/ha.
Instructions for Use
Where to Use
For use on most building materials, pavements, paving blocks, steel, zinc, aluminium, tiles, bitumen, exterior wood, plastic/glass of greenhouse walls (outside), stones, non-grassed sports courses such as athletic tracks.
When to Use
Apply at any time of year, twice a year, when algae is present on both porous and non-porous hard surfaces.
When applying Enclean ensure that the temperature is above freezing. It is better to use the product when rain is not forecast on the day of application – it is generally rain fast within 2 hours.
|Enclean Application Window|
How to Use
1 Litre of Enclean® mixed in 14 L water will treat 555 m2.
- Add 1/2 of the *required water to the spray tank.
- Measure out and add the *required amount of Enclean to the spray tank.
- Add the remaining amount of water.
|Maximum Treatments||Application Rate||Water Volume||Application Method||Spray Quality|
|2 per annum||18 L/ha||250 L/ha||Conventional hydraulic sprayer
Vehicle mounted sprayer
- After application rinse spray equipment with water.
- For zinc, aluminium, stainless steel, steel: if a thin white layer persists 14 days after treatment, rinse with clean water.
- For any other materials than those listed above (including limestone), perform a test on a non-visible corner before extending the application to the entire surface.
- Avoid contact with non-target organisms or plants.
Safety Data Sheet available to download via the Technical Information tab below. Always read the label and product information before use.
For further information on Enclean, please contact a member of our technical sales team on 01952 897917.
Find more information in our guide How To Deal with Moss
Safety Data Sheets
|SKU||Product||Safety Data Sheet (PDF Link)|
|188041||Enclean Organic Hard Surface Algae Remover 555m²||Safety Data Sheet (PDF)|
|SKU||Product||Product Label (PDF Link)|
|188041||Enclean Organic Hard Surface Algae Remover 555m²||Product Label (PDF)|
|188041||Enclean Organic Hard Surface Algae Remover 555m²||ENCLEAN UK BROCHURE February 2020||Download file (PDF)|